Author Archive
Swing-arm Kerosene Wall Lamp
Here’s another real quick project, the two donor lamps are below, both came from our town dump this past weekend. This will be my first lamp with a glass font. Furthermore, this font has a hole in the bottom so I will be making liberal use of the non-traditional
Brass Kerosene Sconce Lamp
This is a lamp for my bus conversion project, most likely it will go in the bathroom. Total project time was about an hour. Above you’ll see one of the donor lamps, this lamp contributed one of it’s arms. The other parts you see laid out above and
The Mae West, an Elegant Kerosene Lamp
This is another lamp for my bus conversion project, I think it will go on a newel post by the entry door. This is another quicky project, it took about 3 hours. This lamp uses more parts from the above left donor lamp that provided the arm for
Toner Transfer Fuser
July 26, 2013 It turned out the that motor on the fuser assembly was 24 VAC and I blew it right up with 110 VAC! But the heater is a 110 volt 1500 watt halogen bulb and a little rummaging through my junk box produced a 240 VAC solid